CleantPro™ Electric Multifunctional Brush

Material: Rubber, Stainless Steel 

Input voltage :5V/1A

Rated voltage :3.1V-4.2V

Maximum power :30W

Waterproof rating :IP67

Input interface: USB Type-C(input interface with waterproof design)

Working gear/speed :2 Speeds ,first speed 360R/Min, second speed 280R/Min

Usage: Long press the switch and short press to switch the high/low gear. The default gear is high gear

Endurance: high speed (no load) continuous use of about 80MIN, low speed (no load) continuous use of about 100MIN

Btatery capacity :2500mAh

Indicator light: The power is displayed by 100% symbol, and 10% changes once

Charging indicator light - Low power: Red light flashing, charging: Red light constant, full red light out

During the charging process, there is a running horse lamp effect to prompt charging

Working state: The normal working state has the corresponding gear light prompt, high speed running horse light running, low speed running horse light jogging

Protection state: The friction of brush head is too large, the motor will block and stop protection, the brush head will stop, the whole machine will be powered off, and it is necessary to re-press the switch key to restore

Certification: FCC,CE,ROHS,UACK,PSE, machine battery

Brush head Angle :360°, rotation direction

Torque: High grade 7.2Kg, low grade 5.8kg

Decibel value (idle state) : 80CM distance is less than 70dB

Charging time: about 170 minutes

Package Included :

1xElectric cleaning brush

2X Extension Rod

3x Brush head

1xBrush head holder

4x Cleaning mop

1x Data Cable

1x Use Manual

30W Power, Strong Speed, Easier Cleaning.

Can Be Extended to 104CM, Three-section Shrink Rod.

2500mAh Lithium Battery: 80 minutes of battery life, no rush for careful cleaning.

Ipx67 Waterproof Safe to Use.

Cleaning and maintenance:

●Please check if the charge is sealed when cleaning.

●Do not use metal such as steel wire or abrasive cleaner or corrosive liquid (e.g. gasoline or acetone)
to clean brush heads and fuselage surfaces.

●You can wash the product under the tap or drive the product to high-end, and automatically clean the brush into the water.

●After the cleaning is finished, it is necessary to shake the moisture on the dry product and wipe it with dry cloth.